DECEMBER 2020

Eurostampi has purchased a new 5-axis milling machine PARPAS SPEEDLINER

X 4000, Y 2600, Z 1500

With 180 tool magazine

DECEMBER 2018

New 5-Axis high-speed Milling Machine successfully installed in Brescia Stampi SPINNER VC1650

Working area X, Y, Z: 1650 x 820 x 820 mm
Rotary table Ø 900 mm
High Spindle speeds up to 14.000 rpm
Tool magazine capacity: 140 tools

OCTOBER 2018

New 5-Axis Milling Machine successfully installed in Eurostampi HERMLE C42

Automatic loading with a 5 pos. pallet changer (850 kg)
Working area: 800 x 800 mm
High Spindle speeds up to 18.000 rpm
Tool magazine capacity: 250 tools
Tool identification with RFID Balluff

AUGUST 2018

Brescia Stampi has purchased a new 5-Axis Milling Machine MIKRON 800 U D

Automatic loading with a 2 pos. pallet changer (500 kg)
Rotary swiveling table Ø 880 x h400 mm
High Spindle speeds up to 20.000 rpm
Tool magazine capacity: 120 tools
Measurement system with touch probe in the machine

JANUARY 2018

Eurostampi has purchased a new PARPAS LINEAR 30, 5-Axis milling machine for finishing and semi-finishing.

Travel (X, Y, Z): 3000 x 2600 x 1400
Milling Spindle: up to 20.000 rpm
Tool magazine capacity: 80 tools
Linear motor

APRIL 2017

NEW EDM MACHINE PURCHASED BY BRESCIA STAMPI

EDM EXERON 314 
The machine ist connected to an automatic electrode changing device and to a pick-and-place roboting system 

Traverse paths X, Y, Z:  900 x 700 x 450 mm
Generator current: 60 A

Available at Brescia Stampi from June 2017 

SEPTEMBER 2016

New machine

The XS is the line of medium/large size gantry machines. It is dedicated to 3 – 5 axis high speed machining as well as heavy duty machining on hard materials (steel, inconel, titanium, etc). The possibility to have automatic head changing system or as alternative, the automatic spindle cartridge change, allows the machines to be much flexible and suitable for complex machining both in moulds/dies industry and in aerospace industry.

MARCH 2016

Brescia Stampi has purchased a Spinner U-1520 5-Axis milling machine with integrated rotary table.

Range:
X 1.520 mm
Y   520 mm
Z  460 mm

Milling spindle: 12.000 rpm

Tool magazine capacity: 32 tools

JANUARY 2016:

Eurostampi hat purchased a SACHMAN TRT 314: 5-Axis milling machine with swivel head utilized for roughing and semi-finishing processes.

Range:
X             3.000 mm
Y             1.600 mm
Z             1.600 mm

Table load: 15 T
Tool magazine capacity: 40 tools

EUROSTAMPI HAS PURCHASED A NEW EDM MACHINE OPS-INGERSOLL GANTRY EAGLE 1400 WITH STORAGE FOR 48 ELECTRODES

The new  Gantry Eagle 1400 can be used dynamically and efficient for big-mould-manufacturing as well as complex workpieces.

NEW mOULD SPOTTING TRY-OUT PRESS

Eurostampi has purchased a new, high-performing, state-of-the-art mould spotting try-out press which considerably increases the capacity for handling medium-large moulds, as part of our corporate policy of continual investment.
Available at Eurostampi from August 2015!

JANUARY 2015 - IMSA MF1000 ROTARY TILTING, DEEP DRILLING MILLING MACHINE FOR MEDIUM SIZE AND MEDIUM COMPLEXITY MOULDS

Fast execution, easy to use, with low operating costs.
Perpendicular drilling (3-axes machining), with single tilt (4-axes machining) and double tilt (5-axes machining due to the rotary tilting table).
Drilling/milling machine for moulds up to 5,000 kg, up to 1,600 mm (diameter of rotation).
Single cycle drilling depth: 1000 mm.
Ideal drilling diameters: 4-25 mm (from solid), 32 mm (boring).
6-axes control: the flexibility of the machine prevents continuous repositioning of the workpieces, even between machining steps, on an inclined plane (table rotation/tilting).

DECEMBER 2014 - EDM ELECTRODE PRODUCTION MACHINING CENTRE

Bresciastampi has purchased a machining centre dedicated to the manufacture of graphite electrodes for EDMs and steel plug, with robotic operation and automatic magazine.